SATA ADAPTERS
Serial ATA to IDE
40-Pin
Serial ATA to IDE Converter
   
SATA CARDS
SATA PCI Cards
SATA PCMCIA Card Bus
   
SATA CABLES
SATA Signal Cable
SATA Signal Cable with power
USB 2.0 to SATA
   
SATA CONVERTERS
SATA Converters
Bi-Directional IDE Converter
USB 2.0 to SATA Bridge Cable Converter
SATA IDE Converter
   
SATA ENCLOSURES
Mini SATA Dual Bay Raid enclosure
USB 2.0 Mini Dual Bay
Mini SATA USB 2.0 Dual Bay enclosure
   
SATA REMOVABLE TRAYS
5.25 inch LED Display
   
SATA MOBILE RACKS
5.25 inch LED Display
SATA to parallel ATA


USB2.0 to serial ATA translation. Serial ATA PHY, Link, Transport. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 ,The AUS100 converter supports a SATA 1.5GHz data rate & USB2.0 480MHz data rate . The application layer supports both the ATA register command set and PACKET command set, which could drive SATA Hard Disk. THIS ITEM IS NOT FOR A MAC OS.

usb adapter cable to Serial ATA Bridge Cable
SATA Cable fort the USB 2.0 to SATA Bridge Cable Power to SATA cable included USB2.0 to serial ATA package
USB 2.0 Adapter to any Native SATA 3.5'' Drive from 80GB up to 500GB. Compatible with Windows ME/2000/XP/2003. Not for MAC!

Adapter plugs directly to your USB 2.0 port on a windows based computer and provides one SATA port (with short cable) to connect directly into your SATA 3.5'' HDD. Uses NEC and Jmicron Chip for Conversion. Real Life Test Results show a 12.9 GB file folder with 237 Files transfered in less than 10 minutes. Tested with WD/Maxtor/Seagate/Hitachi SATA drives.

Uses CHIPSET:NEC-720133, Jmicron-JM20330B2


JMICRON Chip control

JMICRON Chip

Speed processing by NEC chip control

NEC Chip



USB 2.0 to SATA bridge cable converter for serial ATA drives
  • Power LED Indicator
  • Easy install & No driver Needed
  • USB port powered, no need for external power. Only needs less than 1 W of power to operate.
  • Support Win-98se,Win-98me need driver
  • Support Win-2000,Win-xp free driver
  • Max speed (Read + Write) : 52M Byte
  • USB2.0 Specification compliant USB2.0 NEC newest chipset install
  • Max speed (Read + Write) : 52M Byte
  • Automatic Serial ATA 1.5 Gbps speed negotiation
  • Support USB2.0 plug & play and Serial ATA hot plug
  • Ultra low power consumption Work for both AC and DC couple between the transmitter and the receiver
  • Provide specified OOB signal detection and transmission Support Spread Spectrum Clocking to reduce EMI
  • Support Partial/Slumber power management Provide adjustable TX signal amplitude and pre-emphasis level
  • SATA Disk Slave support Speed :Win-98 .....Read >17 Mbyte , Write >14 Mbyte
  • Speed : Win-2000,xp .Read >27 Mbyte , Write >25 Mbyte
USB 2.0 to SATA Bridge Cable
NEC-720133-SATA1
SALE PRICE: $29.98

QTY:     

©2006 SATA WHOLESALE.com