SATA ADAPTERS
Serial ATA to IDE
40-Pin
Serial ATA to IDE Converter
   
SATA CARDS
SATA PCI Cards
SATA PCMCIA Card Bus
   
SATA CABLES
SATA Signal Cable
SATA Signal Cable with power
USB 2.0 to SATA
   
SATA CONVERTERS
SATA Converters
Bi-Directional IDE Converter
USB 2.0 to SATA Bridge Cable Converter
SATA IDE Converter
   
SATA ENCLOSURES
Mini SATA Dual Bay Raid enclosure
USB 2.0 Mini Dual Bay
Mini SATA USB 2.0 Dual Bay enclosure
   
SATA REMOVABLE TRAYS
5.25 inch LED Display
   
SATA MOBILE RACKS
5.25 inch LED Display
SATA to parallel ATA

Serial ATA selectable Bi-Direction converter for serial and parallel ATA translation. Convert from SATA to IDE or IDE to SATA giving you more flexibility and functionality in a converter.
Serial ATA IDE Converter - switch between SATA to IDE and IDE to SATA
Serial ATA front view shows the IDE to
SATA or Serial ATA to IDE switch.

SATA IDE Converter - IDE end of SATA converter
Rear view showing IDE connector
of the SATA connector.

SATA CABLE INCLUDEDPower connector cable includedSATA to power cable included

USBG-300CSP is a selectable bi-direction converter for serial ATA and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The SATA physical, link, and transport layers are compliant to Serial ATA 1.0 CSP300 converter supports a 1.5GHz data rate.

The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin.


SATA bi-direction converter for serial and parallel ATA
translation General Features:
  • Power LED Indicator
  • Easy install & No driver Needed
  • Serial ATA 1.0 Specification compliant Automatic Serial ATA 1.5 Gbps speed negotiation
  • ATA / ATAPI PIO mode 0 to 4 ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.
  • ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count Support SATA hot-plug
  • Provide specified OOB signal detection and transmission Support Spread Spectrum Clocking to reduce EMI
  • Support Partial/Slumber power management Provide adjustable TX signal amplitude and pre-emphasis level
SATA-to-IDE- Bi- Directional Converter
USBG-300CSP
SALE PRICE: $27.89

QTY:     

©2006 SATA WHOLESALE.com